Ork Junkyard Display Board

It would only be appropriate to do something ork-related with the new codex release. Here is a display board I did for Texas Games Con using a Mek Junkyard theme

To get a the ork look, I needed some reference material. I found a technical drawing of an Ork Kroozer, which I blew up and printed out to use as floor for our riser

Getting this design onto the foam is not as tricky as it seems. First I position the template on the foam. I then use a ball point pen and trace each and every line.

This leaves a light indentation

I then use an etching tool on each of the lines to give the detail needed to stand out

Assembling the parts: I used an electrical junction box for the taller shed. The black lower shed is packing from a Fried Chicken dinner at WalMart. The ramp is a roller attachment found at Home Depot. Pipes on the right are submerged into the foam to serve as a guardrail to keep models from falling off

Base Coats

Weathering and flocking. To create the scrap piles in the corners, I used a mixture of chopped up sprues and a rust colored gravel

Add Backdrop and we are complete! Waaaagh!